SYNCHRO DUAL SYSTEM
Home
Contact us
SIAS PRODUCTS
PROFILO SIAS
 
| Synchro Dual System |Explorer| Synthesis |
| Angio XL | Cardio |Integra 900|Integra 800|


Main Features

X ray source:

  • X-ray tube: rotating anode
  • Power generator : 15 Kw
  • Work frequency : high frequency 40.000 Hz
  • Focal spot: 0.3x0.3mm fluoroscopy, 0.6x0.6 mm fluorography
  • Maximum tension : 120 kV
  • Power in scopy : 120kV-50mA
  • Power in fluorography : 120kV-150 mA
  • Thermal security : inserted in the tube with acustic warning
  • Thermal dissipation of the anode : 80,000 H.U/min.
  • Thermal capacity : up to 550 W thermal dissipation
  • Exclusive double cooling system

Fluoroscopy mode:

  • focal spot : 0.3mmx0.3mm;
  • operating modes : auto, manual, pulsed or E.R.;
  • kV range: from 40kV to 120kV;
  • mA range: from 0,2mA to 50mA;

Pulsed digital fluorography mode (Angio)*:

  • pulsed fluorography output: 120kV - 150mA;
  • acquisition rates : up to 25 f.p.s.(1-3-6-12-25fps);

Radiography mode:

  • focal spot : 0.6mm x 0.6mm;
  • kV range: from 40kV to 120kV;
  • mA range: from 25mA to 100mA;
  • exposure time range: from 0.01 sec. to 3 sec.;

TV chain:

  • high definition CCD sensor;
  • scanning aspect ratio: 4:3;
  • 360 ° motorized rotation of image;
  • automatic iris for DSA applications*;

depliant in pdf


The Synchro TR plus equipment is a mobile C-Arm mainly used in cardiology.
The Synchro TR PLUS with Rotating Anode has movements which cover all directions.
Synchro TR PLUS has high quality fluoroscopic image, thanks to the use of the intensifier tube SIEMENS of the last generation and of an high resolution TV chain.
The automatic Dose control acts on whether it is of Kv or of mA value, selecting always the minimum value of radiation with respect to the thickness and density of the radiated area.
The mobile C-Arm is equipped with a digital memory that enables, with a very short issue of x ray, to memorize and to visualize instantly on the monitor an image, this importantly, contributes to a reduction of the dose required.
The equipment allows one to a drasticly reduce the dose, equal to the 75% in the modality Digital pulsed Fluorography at 25 fr/sec.
There is als an output for DICOM 3 for the work- station.
The apparatus instrument is easy to handle because of the precise balance of all its parts in movement .
All the movements of the C-Arm are motorized, however one can operate it manually.
The main features is the high heater dissipation, thanks to the internal heater exchange that allows up to 500W continuos dissipation

 
Copyright 2005 .::. S.I.A.S. S.p.A. .::. Read Privacy Policy